Accessory for cameras of the BT 1100 Line that do not have an alternative source of electrical energy. It is connected to the equipment, keeping it in full operation with instability or commercial power outage. With no need for adaptation, its connection is bivolt, with a robust metal cabinet and capable of storing up to three 105 amp batteries.
| 48H x 35L x 67.5P (cm) external |
| 3 batteries of 105 amps |
| Dual voltage input |
| Dual voltage output |
ALARMS
The alarm system will sound 3 “beeps” every 50 seconds indicating that the PlugUP is active. If the inverter goes into power surge protection or battery power failure, a continuous “beep” will be triggered. After replacing the battery, the equipment must be restarted.
AUTONOMY
The autonomy depends on the amperage provided by the batteries. The cabinet has the capacity to hold up to 3 batteries of 105 amps.
BATTERY CHARGING
The automatic floating battery charger, which is part of the equipment, has the ability to charge 10 amps per hour, so a 100 amp battery will take 10 hours to complete a charge.
FIXED LINE TELEPHONE DIALER
It is activated automatically whenever the battery level is very low, or when the inverter goes into protection due to a malfunction. Up to NINE numbers can be programmed to receive alert phone calls.
GSM TYPE TELEPHONE DIALER
It is activated automatically whenever the battery level is very low, or when the inverter goes into protection due to a malfunction. Up to SIX numbers can be programmed to receive a phone call or text message.
TEMPERATURE MONITORING
Optionally, these equipments can also be equipped with a thermometer with glycerol capsule sensing, for monitoring and triggering an alarm dialer for temperature deviations.
RESETTING
Whenever the system goes into protection, the equipment must be turned off and on again.
